搜索结果: 1-8 共查到“金属材料 particles”相关记录8条 . 查询时间(0.093 秒)
Computer simulation of carburizers particles heating in liquid metal
Liquid metal carburization Computer simulation
2011/6/3
In this article are introduced the problems of computer simulation of carburizers particles heating (anthracite, graphite and petroleum coke), which are present in liquid metal. The diameter of parti...
Composite materials based on EN AW-Al Cu4Mg1(A) aluminum alloy reinforced with the BN ceramic particles
Aluminum alloy Composite materials Powder metallurgy Corrosion resistance Polarisation curve Abrasive wear
2010/8/17
Considerable attention is focused on metal matrix reinforced with strength and high modulus ceramic reinforcements because of their superior properties in comparison with most of conventional material...
Intermetallic phase particles in 6082 aluminium alloy
Metallic alloys Microstructure Electron microscopy Intermetallic phases
2009/12/1
Purpose: In the technical 6xxx Al alloys besides the intentional additions Mg i Si, transition metals and
impurities (Fe and Mn) are always present. Even not large amount of these impurities causes t...
Computer simulation of carburizers particles heating in liquid metal
Liquid metal carburization Computer simulation
2011/4/2
In this article are introduced the problems of computer simulation of carburizers particles heating (anthracite, graphite and petroleum coke), which are present in liquid metal. The diameter of parti...
Corrosion behaviour of the AlSi6Cu4 alloy and cast AlSi6Cu4-graphite particles composite
corrosion metal matrix composites graphite particles
2011/3/30
The corrosion behaviour of the AlSi6Cu4 alloy as a composite matrix and of composites with 8% vol. of graphite particles was investigated. The corrosion experiments were performed over a range of elev...
Corrosion behaviour of the AlSi6Cu4 alloy and cast AlSi6Cu4-graphite particles composite
corrosion metal matrix composites graphite particles
2011/3/30
The corrosion behaviour of the AlSi6Cu4 alloy as a composite matrix and of composites with 8% vol. of graphite particles was investigated. The corrosion experiments were performed over a range of elev...
Sliding wear behaviors of electrodeposited Ni composite coatings containing micrometer and nanometer Cr particles
Ni-Cr composite coating electrodeposition microhardness wear
2010/3/17
Micrometer and nanometer Cr particles were co-deposited with Ni by electroplating from a nickel sulfate bath containing a certain content of Cr particles. Cr microparticles are in a size range of 1...
Manufacturing of aluminium matrix composite materials reinforced by Al2O3 particles
Powder metallurgy Composites Pressure infiltration
2010/2/8
Purpose: The purpose of the paper is to show and compare of modern method composite materials with aluminium alloy matrix reinforced by Al2O3 particles manufacturing.
Design/methodology/approach: Mat...